rss logo

How to Upgrade Allied Telesis Switch Firmware via Command Line Interface (CLI)

Allied Telesis logo

In this article, I’ll show you how to update the firmware on Allied Telesis switches.

💡 Note: We'll need to set up a TFTP server. If necessary, you can check how to do this for Windows and GNU/Linux.

Configuration

Switch Models

  • x530L Series
  • x530 Series
  • x930 Series

Default password

  • The default login / password: manager / friend

Procedure

  • Copy the new firmware to your TFTP root directory.

Check available free space

  • Check available space:
awplus> enable
awplus# show file systems

Copy firmware

  • Copy the new firmware from the TFTP server to the switch:
awplus# copy tftp://IP_TFTP_SERVER/firmware.rel firmware.rel
  • Example:
awplus# copy tftp://IP_TFTP_SERVER/x930-5.5.0-2.12.rel x930-5.5.0-2.12.rel
  • Untested, but we can also do it from USB:
awplus# copy usb://x930-5.5.0-2.12.rel x930-5.5.0-2.12.rel
  • Check that the firmware is present:
awplus# dir flash

Reboot with the new firmware

  • Configure the switch to boot on the new firmware:
awplus# configure terminal
awplus(config)# boot system firmware.rel
  • Check boot options:
awplus(config)# do show boot
Boot configuration
--------------------------------------------------------------------------------
Current software   : x930-5.4.9-2.4.rel 
Current boot image : flash:/x930-5.5.0-2.12.rel (file exists)
Backup  boot image : Not set 
Default boot config: flash:/default.cfg
Current boot config: flash:/default.cfg (file exists)
Backup  boot config: Not set 
Autoboot status    : disabled
Boot Security Level: none
  • (Optional) Set a backup release to be loaded if the main release file cannot be loaded:
awplus(config)# boot system backup x930-5.4.9-2.4.rel
  • Restart to load the new firmware:
awplus(config)# do reboot

Source: https://atportal.force.com